all dimensions are in inches. tolerances (except noted): .xx = .02? (,51 mm), .xxx = .005? (,127 mm). all specifications are to the latest revision s. specifications are subject to change without notice. registered trademarks are the property of their respective companies . general purpose oscilloscope probes sales: 800 - 490 - 2361 fax: 888 - 403 - 3360 technical support: 800 - 241 - 2060 ( technicalsupport@pomonatest.com ) for ?where to buy? in formation, visit the pomona web site at www.pomonaelectronics.com rev: 100 d1094189, d1094528 page 1 of 2 features : passive oscilloscope probes feature a one piece (monolithic) design for robust probe life. probe bandwidth ratings are specified as a system bandwidth. system bandwidth includes both probe and oscilloscope together as a system. the result is a p robe frequency response that can essentially be considered transparent. for ease of use, readout actuator for probe attenuation sensing and a ground reference switch are featured on some probe models. full set of accessories are included with each probe. all probes meet s iec1010 - 2 - 031, 300v, cat i to determine the correct probe, select the probe that matches the frequency bandwidth of the oscilloscope. for example, if your oscilloscope has a bandwidth of 1 00 mhz., select a model that matches the frequen cy in the ?system bandwidth? column (i.e. 5795a) . model probe ratio maximum input voltage cat i 1 system bandwidth mhz ( - 3 db) system risetime (ns) probe input resistance (m ohms ) probe input capacitance (pf) compensation range (pf) readout actuator 4 cable length (meters) 5800a 1:1 300 2 up to 30 3 < 11.66 3 1 < 57 + o - scope na no 1.2 6265 10:1 300 60 < 5.83 10 < 10.5 10 - 60 no 1.2 6266 5 1:1 10:1 300 2 300 up to 20 3 60 < 17.5 3 < 5.83 1 10 < 65 + o - scope < 11 na 10 - 60 no 1.2 5795a 10:1 30 0 100 < 3.50 10 < 9.5 10 - 60 no 1.2 4550B 5 1:1 10:1 300 2 300 up to 15 3 100 < 23.33 3 < 3.50 1 10 < 64 + o - scope < 10.5 na 10 - 60 no 1.2 6049a 10:1 300 150 < 2.33 10 < 10.5 10 - 30 no 1.2 6101a 10:1 300 150 < 2.33 10 < 10.5 10 - 30 yes 1.2 sp150 b 5 1:1 10:1 300 2 300 up to 15 3 150 < 23.33 3 < 3.33 1 10 < 50+ o - scope < 15 na 10 - 60 no 1.2 5803a 10:1 300 200 < 1.75 10 < 10 10 - 60 no 1.2 5806a 5 1:1 10:1 300 2 300 up to 20 3 200 < 17.5 3 < 1.75 1 10 < 77 + o - scope < 11.5 na 10 - 60 no 1.2 582 7 a 100: 1 300 200 < 1.75 10 < 5.5 15 - 50 no 2.0 6069a 10:1 300 250 < 1.40 10 < 10 10 - 30 no 1.2 6102a 10:1 300 250 < 1.40 10 < 10 10 - 30 yes 1.2 5809a 10:1 300 300 < 1.17 10 < 17 10 ? 60 no 1.2 5812a 10:1 300 300 < 1.17 10 < 17 10 - 60 yes 1.2 model 4550B
all dimensions are in inches. tolerances (except noted): .xx = .02? (,51 mm), .xxx = .005? (,127 mm). all specifications are to the latest revision s. specifications are subject to change without notice. registered trademarks are the property of their respective companies . general purpose oscilloscope probes sales: 800 - 490 - 2361 fax: 888 - 403 - 3360 technical support: 800 - 241 - 2060 ( technicalsupport@pomonatest.com ) for ?where to buy? in formation, visit the pomona web site at www.pomonaelectronics.com rev: 100 d1094189, d1094528 page 2 of 2 1 m ax imum voltage allowed on the low connection including shell and housing must not exceed 30v. 2 maximum input voltages are depended on the oscilloscope input characteristics; take the lesser of the two specifications. 3 depended on oscilloscope input cha racteristics (measurement based on 1mohm, 20 pf input) . 4 any oscilloscope that uses the tektronix? style range actuator. 5 probes are switchable between 1:1 and 10:1 range . probe s include s : 1) retractable hook tip 2) bnc adapter 3) ic adapter 4) insulating ti p 5) trimmer tool 6) 6? ground lead with alligator clip accessories: pomona adapters with .025? ( .635mm ) pins replacement accessory kit: 62 67 kit includes: retractable hook tip bnc adapter ic adapter insulating tip trimmer tool 6? ground lead with alligator clip oscilloscope probe tip adapte r model: 6443 this adapter provides an easy, fast, and reliable way to connect your oscilloscope probe to ic test adapters, test clips and grabbers using .025? (0,635 mm ) connection pins. 5360 5790 6311 6312 6313 6351 6352 6353 6490 6442 6444 all ?ic? test clips
|
